TORI TIMBER OU

TORI TIMBER Company maintains generally: wood export trade, cross countries material procurement (pallet and packaging sawn timber and round wood logs for wood cluster industries such as saw milling, fencing stakes, utility poles, engineered boards, pulp and paper, fuel/energy wood logs) and of course forest harvesting cooperation (representing short supply chain).Our core business: wood product supply on a long term basis.1. ROUND WOOD LOGS (Saw Milling Industry): We supply Soft Wood species (conifer) saw logs, such as Pine (Pinus Sylvestrys), Spruce (Picea Abies).Spruce and Pine saw logs logs main specification:Just an example: Length=3600 + L=300mm step, or standard auxiliary lengths loaded per 40&＃39;HC container L=3900/4000mm and L=5800/max6000mm + free trim ca100mmDiameter taxonomy (mm): D=120-199, and 200mm and up.Middle Average Diameter for D=200mm and up is approximately MAvD=250+mm.NB! We use our regional species adopted chat for volume measurements and estimation. We measure diameter from smaller end of log under bark according to the common European Estimation Chat.Hard wood species logs: Birch (Betula Pendula), Aspen (Populus Tremula) and Alder (Alnus Glutionosa):BIRCH LOGs: Length=2700/3000mm + free trim ca100mm; Diameter taxonomy (mm): D=180-259, and 260mm and up.Alder logs: D=180mm and up, L=2500/3000+FT100mmAspen logs: D=180mm and up, L=2400/3000+FT100mm1.1. Raw logs billets for poles and stakes manufacturing industries: agricultural fencing, vineyard trellising, garden/palisade, garden or park fencing, footbridges and walkways.Wood Species: Pine (Pinus Sylvestris), Spruce (Picea Abies) also known as White Wood.Raw logs billets for poles and stakes: L=2500/3000/4000mm, D=50-150/200mm (measured from smallest end of logs)Raw logs billets for utility poles: L=6000/8000mm, D=110-160/200mm (measured from the smallest end of logs).2. PALLET and PACKAGING TIMBER: our company represent large scope of small and middle sized saw mills (more than 150) for serving segment industries (cargo packaging, pallet timber, storing support timber, dunnage timber, wooden boxes and crates timber, machinery packaging etc.). We serve this industry with wood mixes mainly (Pine-Spruce MIX, Aspen-Alder MIX) according to quality requirements and price reasonability.2.1. Despite the fact of packaging core segment there are some dimensions which are taking place for constructional, manufacturing or fencing industry use, such as block wood or half block wood and etc.There are some dimensional limits specifics: maximum article length L=3000 and cross-sections 150x150mm.Our common cut to lengths article dimensions (C2L): L=1000/1200/1500/2400/3000.Please note we supply: Fresh Cut, Rough Sawn, Saw Falling Grade, Air Dry and AST treated material. We do not supply KD material.FSC certification (round wood logs segment only): we supply FSC Controlled Wood logs by default option to the same certification granted companies if needed.Should any questions arise, please do not hesitate to contact me immediately.Best regardsVladislav KuznetsovExport Executive Manager Phone: (+372) 5 66 33 818 | Fax: (+372) 44 99 275 vladislav (at) toritimber.com | www.toritimber.comSkype: vladislav.toritimber