Longkou Deyi Machinery Co., Ltd

Specifications DYEPE90 EPE Foam Sheet Extrusion Line
a.sheet thickness:0.5-4.5mm
b.sheet width:1000-1400mm
c:capacity:70-100kg/h
The raw material of EPE foam sheet extrusion line is high pressure polyethylene; it is fed into the extruder with the L/D 55:1 by automatic loading equipment. The talcum powder is fed into the unloading equipment through the Italy double screw. And then enter into screw to plasticize. The anti-shrinking agent is injected into spiral tube by GMS pump to mix with raw materials. The function is to prevent the products shrinking. The liquid butane will be injected into the screw tube through the high pressure butane pump to foam. After cooling by the screw tube, the plasticized blend materials will extrude out from the nose. After the product reaching the length customer requires, the meter counter will alarm automatically. And then change the roll, weigh, pack and enter into warehouse.



We have the following equipment models: DYEPE-90, DYEPE-105, DYEPE-120, DYEPE-150, DYEPE-170, DYEPE-200 and so on. Their daily capacity is about 2tons, 3tons, 4tons, 7tons, 10tons and 12tons separately. The customer can choose the proper model according to actual demand. We are also very glad to research, calculate and recommend the needed model.



EPE foam machine can make different foam sheet width and thickness according to customer requirement. Meanwhile, it can also make foam pipe, foam net, foam rod, foam profile and so on through changing mould and machine parts.

The foam sheet has the features of dampproof , shockproof, soundproof, heat preservation and good plasticity. After laminating, the foam sheet will get high dampproof performance. These products are mainly used for placing under floor.

Applications:

I.     Characteristics of Product

--High resilience and buoyant effect.

--Effective insulating capability.

--Low thermal conductivity.

--Negligent absorption and water permeability.

--Chemical