Compactors NULISSON

An innovation in the field of construction equipment. It contains an informative notice for you, the person responsible for machinery and equipment (we ask that you forward this information on to the person in charge). The NULISSON CRED 450 is a so-called “second generation” compactor into which the attributes of many compactors in the same weight category (95 kg) have been combined, putting it in a unique position amongst other makes of compactor. ATTENTION! All relevant components (standard parts) of the NULISSON CRED 450 have been standardised and are easy to find in branch outlets. The same applies to the rubber pads, the bearings and the gaskets as well as the screws, fan belts, pulleys, and switches - everything classed as “shelf goods” (our repair package costs 66€). Special screws or clamps are not required. For this reason, describing this as a new product (range) is, to a certain extent, incorrect. In addition, one can choose from a range of motors; Honda, Robin Subaru or Kohler (currently well known makes of motor). At the following address ***** you can view videoclips which demonstrate the usage of the equipment and give a clearer picture of the machine can do. This round model was formerly produced in Finland, but is currently manufactured in Spain. Over the years, approximately 3, 000 pieces have been produced in all and through product development, the machine has “come of age”. Nowadays, “rammers” are no longer seen at plant hire suppliers or on building sites in Finland, as a consequence of the vibrating compacto Jack Ilisson