Shenzhen Aodekang Industry Co. Ltd.

We are Shenzhen Aodekang Industry Co. Ltd. based in Shenzhen , China. We are member of Tradekey.com since January, 2011. Our business is related to Industrial Machinery industry and we specifically deal in silicone rubber product. Please find our product details below: oil drum heater(silicone rubber) drum heater(silicone rubber) Description: This silicone heater has been specifically designed to ease the removal of various viscous materials From a drum. Heating adhesives, grease, asphalt, paint, wax, oil and various resinous Materials results in a constant viscosity, maximizing pump efficiency. This heater responds well To seasonal and climatic changes. On the surface of the heater there installed the Sensor , adjustable temperature controller and power line. Parameters: Drum Capacity 200liter 20 liter 200liter Dimensions 250x1740 200x860 125x1740 Electric Data 220V/2000W 220V/800W 220V/1000W Temperature range 30-150 30-150 30-150 Weight 0.5kg 0.4kg 0.3kg Barrels diameters 580mm 300mm 580mm silicone rubber heater Introduction: silicone rubber heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5mm, Adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers. Characteristics: 1. Fast heating with a coefficient of heat conductivity of only 1W/m.k. Due to its small thermal capacity, prompt turn on/off can be achieved. 2. High thermal efficiency: The temperature of electric heating film itself is only tens of centidegrees higher than that of the liquid when heating, which is 2-3 times energy saving than ordinary electric stoves. 3. Water, acid and alkali resistance, high-strength of electric insulation. 4. High mechanical strength with 100kg/cm² mechanical pressure. 5. Small size: Small space occupied when applying this heating product. 6. Easy application: Its self-insulation and free-of-open-fire property greatly help simplify the techniques of heat preservation and thermal insulation. 7. Its wide range of temperature, -60°C~250°C, can not be simply achieved by other electrical appliances. 8. Long service time: Under normal use, the product almost can be permanently and continuously used because nickel and chrome materials are durable to any corrosion, and the silastic has a high surface resistance up to 100kg/cm², which is uncomparable for any other electric heaters. 9. Made in any size, the temperature of the product can be precisely adjusted by temperature controller. Technical parameters of silastic heaters: Standard High Temperature Continuous temperature 150.00°C 250.00°C The maximun temperature 250.00°C 280.00°C Dimensions Maximum 500.00mmx5000.00mm Minimum 25.00mmx25.00mm Thickness 1.50mm Wire length Standard 200.00mm Technical Data: 1. Temperature range: -40.00~250.00°C 2. Electric resistance precision: ±10%( bigger value selected) 3. Power density: 0.10~1.50w/cm² 4. Mechanical pressure: 100.00kg/cm² 5. Minimum bending radius: 3.20mm Application : 1. Industrial equipment, pipelines, barrels, tanks, etc. 2. Outdoors telecommunication equipment 3. Medical equipment and devices 4. Outdoors electronic devices ***** imaging of imaging equipment 6. Case protection under cold and moist environment 7. Industrial ovens and thermal processing equipment 8. Ventilator supports 9. Laminating equipment 10. Vessels Silicone thermal conductive Introduction: K1500 series thermal silica gel is a kind of silicon rubber-based gap filling material which is highly compressed with high heat-conducting filling materials. The coefficient of heat conductivity can reach 1.50 W/m.K. This kind of materials is aiming at offering superb heat-conducting property and maintains the cost efficiency of customers as well. The self-adhesion of K1500 enables them to stick on heating interfaces without back adhesives or binders. Apply K1500 heat-conducting silica sheets with appropriate thickness to the gaps between heating interfaces and their components according to the different sizes of the heating interfaces and gaps to form seamless connections between the heating interfaces and related components. Physical properties: 1. Precise dimensional stability, Excellent electrical insulation 2. Product self-adhesion, you can choose different colors 3. Common specifications: 200mm * 400 mm(7.8740"*15.7480") 4. non-toxic substances, in line with ROHS requirements Application: 1. UPS power supply applications, inverter power sources Applications 2 .DVD, VCD heating interfaces; 3. High and low power LEDs; 4. High and low power heating units. Product data: Test Project K1500 Test Results Units Tolerance Test Method Color Gray / / Visual Thickness 0.50to15.00 / 0.02to0.59 mm/ inch ±10% ASTM D374 Specific Gravity 2.35 g/cm³ ±0.20 ASTMD792 Hardness 40.00 Shore 00 ±5.00 ASTM D2240 Voltage Endurance ≥3.00 KV/mm ±0.30 ASTM D149 Elongation 0.50 % ±0.20 ASTM D412 Tensile strength 3.00 Kgf/cm² ±0.50 ASTM D412 Temperature range -40.00 to 200.00 ºC/ EN 344 Thermal conductivity 1.50w/m.k ±0.30 ASTMD 5470 UL Flammability Rating V0 //UL94 oil drum heater(silicone rubber) drum heater(silicone rubber) Description: This silicone heater has been specifically designed to ease the removal of various viscous materials From a drum. Heating adhesives, grease, asphalt, paint, wax, oil and various resinous Materials results in a constant viscosity, maximizing pump efficiency. This heater responds well To seasonal and climatic changes. On the surface of the heater there installed the Sensor , adjustable temperature controller and power line. Parameters: Drum Capacity 200liter 20 liter 200liter Dimensions 250x1740 200x860 125x1740 Electric Data 220V/2000W 220V/800W 220V/1000W Temperature range 30-150 30-150 30-150 Weight 0.5kg 0.4kg 0.3kg Barrels diameters 580mm 300mm 580mm Thank you for taking the time to go through our business profile. If there are any question, inquiry or comments, please feel free to contact us.